All of the companies contact information and initial negative pressure readings should be on the sticker next to your manometer on the pipe. If you see this, call the company who installed your radon system. You should look at your warning device on a regular basis to make sure the system is working correctly. If your manometer is reading 0 on both sides of the mineral water inside of the tube, the radon fan is no longer pulling any air from under the home. Homes that have very tight soil such as clay or sand under the slab will show a high negative pressure reading on the manometer because those soil types provide high resistance to move air. RadonAway Easy Read U-tube Manometer is not suitable for use with system pressures above 4.5 WC. Radon can be pulled from the soil beneath a house by attaching an exhaust fan to the collection pipe or to the sealed sump (see page 9). If the system is working properly, it will create suction and draw the blue fluid up so that the levels are uneven, as shown below. There is a small tube that inserts into the system’s pipe. The first way is to regularly check the manometer (U-tube) that should be. This device does NOT measure radon levels. Next, we installed a U-Tube manometer, a gauge that indicates whether or not your system is working. Homes with a sump crock and drain-tile typically will show lower negative pressure readings because it is easier to move air through drain-tile than it is through the soil directly. There are two main ways you can monitor your radon mitigation system to ensure. A higher pressure means that there is more resistance and less air volume moving underneath the home. A lower negative pressure means there is less resistance and the system will be able to move a higher air volume. The CRM-1 also uses proven photomultiplier tube. Radon gas in air or water is a health hazard resulting from uranium breaking down in soil. The electronic radon monitor gives its first radon reading after 48-hours of radon gas sampling. The manometer measures the negative pressure that the system is getting underneath the slab. The CRM-1 is a popular industrial radon monitor that is used to actively monitor radon in process gases. The easy to read, digital radon level display shows short-term radon levels as well as long-term radon level averages. Lifetime Radon Mitigation Port Washington Lifetime Radon Mitigation Pleasant Prairie Lifetime Radon Mitigation South Milwaukee RadonAway Easy Read U-Tube Manometer Features Reads 0-4.5' WC Non-toxic fluid Adjustable zero Molded scale curved to fit system pipe Also available through our Canadian distribution location. Lifetime Radon Mitigation Menomonee Falls
0 Comments
Leave a Reply. |